How To Install Garbage Disposal In New Sink

Download Article

Download Article

Did your onetime garbage disposal finally break down? Installing a new garbage disposal isn't difficult as long as you accept the right tools and materials. Make sure y'all have the correct type of disposal for your plumbing, then follow these instructions to take your disposal working in no time.

1. 

   ane

   Figure out what kind of garbage disposal you lot need. When yous're shopping for a new disposal, there are several factors to take into consideration. Remember near who will be using the disposal, whether a noisy disposal is an upshot in your household, and what kind of plumbing yous have at your home.

   • If yous have children who volition be using the disposal, consider getting a batch feed disposal rather than a continuous feed disposal. Batch feed disposals, which are a scrap more expensive, crave the employ of a stopper prior to operation, which can exist safer in households with kids. Continuous feed disposals start running when you lot flip a switch and keep running when y'all switch it off. If someone drops a utensil down the bleed or sticks their paw inside, this tin can exist a unsafe situation.^[1]
   • Choose a motor that'south right for your household. Models with lower horsepower, normally about 1/3, are suitable for modest households with a small amount of food waste. Models with 1/2 horsepower are better for larger households with more food waste material.^[2]
   • Consider the features y'all want the disposal to accept. For a higher price, you can purchase a disposal made to function more quietly, one made from stainless steel, or one that connects to your dishwasher.
   • If your plumbing is connected to a septic tank, you need to buy a disposal fabricated especially for septic tanks.

2. 

   ii

   Gather tools and other supplies. In add-on to an advisable garbage disposal, you'll need the following equipment to consummate the installation:

   • A screwdriver
   • A disposer wrench
   • A hacksaw
   • Water pump pliers
   • Plumber'southward putty
   • Electrical cord
   • Safety supplies, including goggles and a dust mask

   Advertisement

3. 

   3

   Plough off the power. Make sure the power to the garbage disposal is turned off while you lot're installing it. Cover the panel box to make sure no ane tin turn it back on until the chore is complete.^[3]

   Advertisement

1. 

   i

   Detach the dishwasher hose. Not all disposals are continued to a dishwasher, but if yours is, use a screwdriver to loosen and detach the hose attaching the disposal to your dishwasher.^[4]

2. 

   two

   Detach the waste line. Remove the "P" trap waste material line running from the disposal by using a wrench to unscrew the slip-nut connecting the disposal to the trap. You might desire to identify a saucepan under the trap to grab any wastewater sitting in the lesser.

3. 

   3

   Have off the disposal. Remove the disposal by inserting a screwdriver into the mounting ring lug and turning counterclockwise until information technology comes loose.

4. 

   4

   Take autonomously the rest of the mounting assembly. Remove the band on the sink sleeve, the sink sleeve, the flange, the fiber gasket, and the plumber's putty. Terminate preparing the sink for the new disposal by cleaning the sleeve, flange and sink opening.^[5]

   Ad

1. 

   1

   Wire the disposal. Some disposals come with appliance wires attached, and others do non. If yours doesn't, remove the cover plate beneath the disposal and attach the wires according the manufacturer's instructions. Most standard disposals have you adhere white wires to white wires and black wires to blackness wires. When you're finished, screw the cover plate back on.

2. 

   2

   Install the drain flange and mounting ring. Roll plumber's putty between your hands to form a snake nearly 1/2-inch thick and 10 inches (25.4 cm) long. Apply it to the underside of the drain flange under the sink. Insert the flange into the bleed hole and printing downward evenly to adhere it. Then snap on the backup ring, fiber gasket and mounting ring.

   • Working from beneath the sink, apply a screwdriver to screw the mounting ring tightly against the sink. Information technology helps to alternate sides, screwing one spiral and switching to the other, so that the mounting ring tightens evenly.
   • Some of the plumber'south putty will have squeezed out around the flange. Use a pocketknife to trim it away.

3. 

   3

   Mount the disposal. Identify the disposal into the mounting ring, making sure that the disposal's outlet is facing the drain pipage connectedness. Tighten information technology until the disposal stays in place.^[six]

4. 

   4

   Connect the disposal to the P-trap. Measure out the discharge pipe and use a hacksaw to cut it to size, then attach it to the outlet on the disposal. Be certain to read the manufacturer's instructions to make sure you connect it properly. Attach the dishwater belch tube as well.

5. 

   5

   Bank check the disposal. Turn the power back on, run water into the sink and turn on the disposal to make sure information technology works. Check underneath to be sure at that place aren't whatsoever leaks. Run some food through the disposal to be sure it grinds and gets tending of properly.

   Advertisement

Add together New Question

• Question

  What if the disposal leaks through the reset button?

  

  You have a leak somewhere inside the seals of the disposal. Disconnect the power immediately and supersede it.

• Question

  What do I practise if my garbage disposal is stopped up?

  

  Very ofttimes the circular blade within is stuck. Practise Non REACH INSIDE TO FREE It! Simply insert a long, sturdy, wooden handle (a broom handle will suffice) into the opening. Let it rest against the inside wall, and with force pushing down, rotate clockwise until y'all feel information technology turn freely. It may be necessary to reset the disposal. If so, locate the reset switch on the bottom of the unit. If the clog persists, employ any type of drain cleaner to gratis it.

• Question

  What do I practise if the sinks fill with waste material water when the dishwasher empties?

  

  For at present, get out the water in the sink and plough off the dishwasher if the sink looks like it's going to overflow. Normally this happens because of a clog somewhere, either in the dishwasher, sink, or disposal, so check for clogs to detect the source of the consequence.

• Question

  How do I fix a leak most where the disposal is fastened to the ring?

  

  Most hardware stores carry gasket kits for sink drains and disposals. Included in these are instructions for installation. It'southward quick and easy and cheaper than hiring a plumber.

• Question

  Why exercise I need an electric cord?

  

  The disposal needs power. The electrical cord connects the disposal to the outlet for electricity.

• Question

  Now the dishwasher does not empty. What do I exercise?

  

  The new disposal unit has a connectedness for the dishwasher, but at that place is a seal inside that connection. It's there for kitchens without dishwashers. Remove the seal, then reattach the dishwasher drain hose.

• Question

  What causes the wire band to pop off?

  

  Your water is too salty.

• Question

  What do I do if I don't know if the garbage disposal is on when hooking up the wiring?

  

  You need to turn off your circuit billow for that outlet. You also shouldn't accept the disposal plugged in while attaching the wires.

• Question

  Should the drain hose from a garbage disposal to the drain trap be exactly horizontal or slightly tilted?

  

  Information technology should tilt down from the discharge of the disposal to the drain trap to ensure h2o does non stay in the disposal and cause corrosion (at least 1/4" per ft. is recommended).

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• Have a partner help you hold the disposal in place while y'all're tightening the various parts, since it can be hard to do this on your own.

• Use a small-scale hydraulic bottle jack to lift information technology and hold it up while securing it.

Thanks for submitting a tip for review!

Advert

• If you're attaching a dishwasher drain, exist sure to knock out the seal before attaching the hose.

Advertisement

Things Y'all'll Need

• A partner
• A small scissor jack
• A short length of 2X4 wood

About This Article

Article Summary X

To install a new garbage disposal, beginning past removing the sometime disposal and taking apart the residual of the mounting assembly. Then, attach the wires in your new disposal co-ordinate to the manufacturer's instructions, insert the drain flange, and spiral the disposal into the mounting band. Afterwards, connect the disposal to the sink trap and the dishwasher discharge tube. Finally, run water into the sink and plough on the disposal to brand sure that information technology works. To larn more, including how to figure out what kind of garbage disposal yous need, scroll down.

Did this summary assistance yous?

Thanks to all authors for creating a folio that has been read 233,398 times.

Did this article help you?

Source: https://www.wikihow.com/Install-a-Garbage-Disposal

Posted by: crosslenst1948.blogspot.com

Share this post